I've had a gas engineer here today seal off an old cooker point as we don't use gas - the bayonet connection has been there unused for 4 years but I wanted to make sure it was properly sealed off.
He used a threaded metal plug, smeared Gasseal around the threads, unscrewed the bayonet and screwed the plug on tight.
Is this sufficient? I was thinking it may have needed to be blow torched shut... ?
He used a threaded metal plug, smeared Gasseal around the threads, unscrewed the bayonet and screwed the plug on tight.
Is this sufficient? I was thinking it may have needed to be blow torched shut... ?