Hi looking for some help before this machine gets condemned.
Machine had stopped spinning, I though the usual and so cleaned out the filter but there was very little in it. Using online guide I get an error code of E23 which is a drain issue.
To check I got the code from two flashes of the Start/Pause and End lights together and then three flashes of the End light on its own, am I reading that right?
I have gone through all suggested checks, I can get the machine to fill and empty, so pump/drain doesn't appear to be the problem but it wont spin.
Any suggestions, it seems the only solution is a new control board and it's really not worth the expense.
Machine had stopped spinning, I though the usual and so cleaned out the filter but there was very little in it. Using online guide I get an error code of E23 which is a drain issue.
To check I got the code from two flashes of the Start/Pause and End lights together and then three flashes of the End light on its own, am I reading that right?
I have gone through all suggested checks, I can get the machine to fill and empty, so pump/drain doesn't appear to be the problem but it wont spin.
Any suggestions, it seems the only solution is a new control board and it's really not worth the expense.