oven fitting

[6040howard]

Hi a quick question,
not having done it before I am fitting a built in electric oven and a seperate built microwave oven in the same oven housing unit. questions
(1) do the necessary supports frames come for both ovens in the flat packed housing unit?
(2) when fitted is there a gap between the 2 ovens that needs filling with the kitchen decor strip?
(3) any points to watch out for? thanks 6040howard

 

[PrenticeBoyofDerry]

(1) do the necessary supports frames come for both ovens in the flat packed housing unit?

Normally yes but will depend on from whom you are being supplied, ask them the question before purchase.

(2) when fitted is there a gap between the 2 ovens that needs filling with the kitchen decor strip?

Again depending on the design, but I would expect some form of ventilation gap between appliances. Normally any infill, would be supplied by the supplier of the kitchen unit.
(3)

any points to watch out for? thanks 6040howard

Your electrical supply to the appliances needs to correctly rated, for cable size and protective devices, local isolation in place that is easily accessible and any new cabling will also need to comply to mechanical protection of cable/RCD protection requirements.
If you live in England or Wales, notification of new cables within kitchen is required.