Hi, need some help with replacing a ceiling light. The existing wiring can be seen in first picture below, the block has four terminals - I have three red going into a 'Loop' terminal (assume this is the two circuit lives and the switch feed?), two black going into 'N', and one black going into 'L'. I'm assuming this last wire is the switch return cable?
My question is how I should wire this lot into the new light which only has 3 terminals - live, neutral and earth (see second picture)? Should I just connect the black 'L' wire into the live terminal with the three red wires? So those four in L, the other two black in N, and then the earths?
https://drive.google.com/file/d/0Bwo-jjIwzZk_Z3R4OTJjZVhtY1k/view?usp=sharing
https://drive.google.com/file/d/0Bwo-jjIwzZk_YUc3VmxPRFFobWs/view?usp=sharing
My question is how I should wire this lot into the new light which only has 3 terminals - live, neutral and earth (see second picture)? Should I just connect the black 'L' wire into the live terminal with the three red wires? So those four in L, the other two black in N, and then the earths?
https://drive.google.com/file/d/0Bwo-jjIwzZk_Z3R4OTJjZVhtY1k/view?usp=sharing
https://drive.google.com/file/d/0Bwo-jjIwzZk_YUc3VmxPRFFobWs/view?usp=sharing