Tanalised 12mm Plywood
- Thread starter aerochago
- Start date
Keep the edges as dry as you can, and heavily treat with a Sadolin product......it will still delaminate after a while though!
John
John
I remember some years ago it was mentioned that heating up the edges with a blowlamp and brush a diluted pva mixure in was a ggod idea, was that so?Keep the edges as dry as you can, and heavily treat with a Sadolin product......it will still delaminate after a while though!
John
Alan
I guess anything that seals the end grain can only help, Alan. I'm not sure about the heating though, unless it softened the adhesive to some degree.
I've got some exposed ply edges on my soffits, and I closed them with aluminium channel which helps enormously but that would be almost impossible on a garden railway!
John
I've got some exposed ply edges on my soffits, and I closed them with aluminium channel which helps enormously but that would be almost impossible on a garden railway!
John
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
