- Joined
- 23 Feb 2020
- Messages
- 44
- Reaction score
- 0
- Country
Hi everyone. I hope I am putting this in the correct forum. We had a shower installed a couple of years ago now the sealant is mouldy and needs replacing. I have a problem - I dont know why or how but when the 'plumber' ( I use the word plumber very loosely) put the cubicle in there is a gap between 1 side of the cubicle and the wall. At the top it is a good inch but by the time I get to the bottom there is nothing. It was filled with sealant and not very tidily but now the sealant is black and mouldy and I want to replace it. I have great difficulty to get it all out as it is a very tight corner and the shower itself is close to it. Can anyone suggest what I could use to fill this gap please. The cubicle itself is the usual silvery coulour. Could i use some beading or something similar. Sorry for the long winded story but needed to explain.
Read more: https://www.diynot.com/diy/threads/...and-shower-cubicle-edge.554565/#ixzz6aJSRrC9g
Read more: https://www.diynot.com/diy/threads/...and-shower-cubicle-edge.554565/#ixzz6aJSRrC9g