Air in the Pump

"There are no radiators being fed by the boiler so it seems simple but I can't see where to air bleed this pump ".[/QUOTE]
The above is quoted from your first post !!
You are not making much sense !!
 
Sponsored Links
"There are no radiators being fed by the boiler so it seems simple but I can't see where to air bleed this pump ".
The above is quoted from your first post !!
You are not making much sense !![/QUOTE]
I thought it was just me, love when getting information is like drawing teeth :rolleyes:
 
Is the F&E tank full of water ? Are all rads full of water ?
You may have a blocked feed ,and system full of air.
Did you bleed the rad or drain it ,as you told us earlier.
I took the nut off where you bleed it to get a better flow.
The water went everywhere but that was no problem.

So the radiator didn't empty.

I was doing that because half of my (very ancient) downstairs radiators don't work and this system of "forcing a strong bleed" has worked for me in the past.

I am not sure if all the roads are full of water as some have not been used in 30 years.
 
Sponsored Links
Call a central heating engineer to help solve your problem ,and the highways agency to report the roads that haven't been used for 30 years.
 
I meant rads -not roads(bluddy autospell)

At first I wanted to say that this was just the hot water as that pump just does the hot water.

But ,yes I have downstairs rads that work from the same boiler but from a different pump.

Sorry for that.
 
The hot water seems to be back now as a result of turning that screw.

I heard a "whoosh" when I turned it and that may have been where the problem was.
 
Thats great , hopefully your sorted .
Just one thing.I just had a look at that screw that I was told by ianmcd not to touch and that it needed to be aligned with the pipe (if I got that right)

It is ,shall we say at I or 2 o' clock wrt to direction of the pipe. (ie not 12 o' clock)

Should I leave it as is since the circulation is fine or should I touch it again to align if with the pipe?

It is ,apparently the "isolating valve"
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top