Building a stud wall for shower enclosure

Joined
30 Jan 2014
Messages
52
Reaction score
0
Location
Cheshire
Country
United Kingdom
We are renovating our bathroom and adding a shower. Its going in a corner, need to build a stud wall to complete the enclosure, before adding the screen door. Question is should the wall go up to ceiling or just above where the screen will sit?
I'm thinking if three walls are at ceiling, the steam only has a small gap above the doors to escape before drawn into the vent. Also trying to get the stud solid without a fixing in the top, would have to rely on the screen pulling it together.
Any help or advice would be welcome.
 
Sponsored Links
I would go to the top, and have an extractor vent in the ceiling/wall of the enclosure, that way you capture and expel all of the steam
 
Also trying to get the stud solid without a fixing in the top, would have to rely on the screen pulling it together.
Build proper walls, then, not some mickey-mouse jobbies made out of bits of wood and plasterboard.
 
Or just install a large glass shower enclosure, and not have to bother building any walls of any sort.

P7310055-1.jpg
 
Sponsored Links
Its going in a corner
How much space do you have, or could have with a bit of rearrangement? A rectangular space which is long enough can be done without a door, which reduces cost and complexity.

walk-in-shower-2.jpg
 
Had looked at installing a vent above the shower, however the ceiling is barrelled and had read its not recommended. Also cannot use a glass partition as the shower will be mounted into this wall.
 
Also cannot use a glass partition as the shower will be mounted into this wall.
Ah - OK.

If you were sitting there really, really wanting a glass partition it would probably be doable, as you can get free-standing showers - no wall needed, but it doesnt sound worth the hassle for you.

I still say build a real wall, though ;)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top