Best way of getting rid of tree stump (that’s out of the ground)?

Joined
29 Jan 2008
Messages
2,064
Reaction score
423
Location
Liverpool
Country
United Kingdom
Dug up this bad boy after a battle…but it’s too big & heavy to move without the digger and I need to get rid.

I think all the dirt will blunt my little chainsaw.

All I can think of is getting an axe and swinging way until it’s in more manageable pieces…so looking for other suggestions please!?
BC3050AC-42CF-4777-91CB-A84AEF986533.jpeg
 
Sponsored Links
Hmmmmm if only you had a trailer, even better if the trailer had a set of ramps! Winch would be a bonus, wouldn't even need the digger to load it.





If you're going to do anything else like that in the future, get a thumb for the digger


 
Sponsored Links
Certainly a good way to annoy the neighbours :D

How about a big 'ol axe?

That was what I was thinking, but trying to avoid the manual labour if possible!

Hmmmmm if only you had a trailer, even better if the trailer had a set of ramps! Winch would be a bonus, wouldn't even need the digger to load it.





If you're going to do anything else like that in the future, get a thumb for the digger



Trouble is I need to lift it into a green / timber waste skip at the tip, so it needs to be in smaller bits.

Never seen a 'thumb' before...thankfully this is a once and done event.

Pressure wash it off thoroughly and chainsaw it

I tried that to get some of the roots cut and didn't have much success as the smaller roots just clung onto the dirt. (140 bar pressure washer). Managed to blunt my new chain pretty quick. I might just buy a couple of spare chains and just sacrifice them for the great good :)
 
I’d pressure wash it.
I know that you say you have tried, but it will work. It will need to be done repeatedly before the soil comes off.
 
I dog out a Biggie, by hand, took me weeks. Winched it onto my trailer, took it to the tip and they sent me down the bottom bit (where the bin lorries empty) into a huge building that absolutely stank - we manhandled it off the back onto the floor. On the way out they gave me a weighbridge ticket - the stump weighed in at 600kg!

Screenshot_20230604-220624-134.png
 
Probably cheaper to get a waste disposal bloke to take it, you can load it onto his truck.

The problem is shifting it, even now it’s too heavy for my digger to lift…I think because of the dirt attached more than anything.

Also, knowing the waste disposal folks around here, I expect it’ll just end up dumped in a ditch or country road.

I’d pressure wash it.
I know that you say you have tried, but it will work. It will need to be done repeatedly before the soil comes off.

Yeah, I probably need to persist with this a bit more. I might just leave the hose running on it for an hour or two to see if that helps loosen the caked on dirt.

Forgot to say, have you tried selling it?




Ha, no sure anyone could carve anything meaningful out of this old conifer!
 
Links in this post may contain affiliate links for which DIYnot may be compensated.
I dog out a Biggie, by hand, took me weeks. Winched it onto my trailer, took it to the tip and they sent me down the bottom bit (where the bin lorries empty) into a huge building that absolutely stank - we manhandled it off the back onto the floor. On the way out they gave me a weighbridge ticket - the stump weighed in at 600kg!

View attachment 305216
Wow, that’s a beast!
 
When we moved into this house, there was a massive conifer in the garden - probably 10-12” thick. I chopped it down and dug below the roots to get it out. It had three main roots nearly as thick as the trunk itself. They went a fair way. I chopped the stump out and left the long roots in the ground. A year or so later I was digging in that area and came across one of the old roots. It had completely broken down so I’d say to you….dig a hole and bury it - it’ll eventually break down.

Another idea - look out for a grab lorry and bung the driver a few quid.
 
Last edited:

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top