How to but a screw bit in half

[carmanmemoranda]

No mention of a car.

True, but he said number plate

Any number plate on any vehicle has to be easily readable. It cannot be covered.

 

[Harry Bloomfield]

Any number plate on any vehicle has to be easily readable. It cannot be covered.

No one suggested, or mentioned, covering the number plate.

 

[carmanmemoranda]

No one suggested, or mentioned, covering the number plate.

Then there will be direct access to put a screw in

 

[foxhole]

True, but he said number plate

Any number plate on any vehicle has to be easily readable. It cannot be covered.

Door number plate ? (Edited)

 

[carmanmemoranda]

Door number plate ? Edited too

Nor me then. Just automatically went for car number plate.

A lack of decent photo didn't help

 

[jj4091]

No mention of a car.

Pic looks like he is trying to fit a screw behind the hitch on a tow bar.

 

[cdbe]

Take your pick:

If it's the car one, probably Chinese tat, or failure to follow the fitting instructions.

 

[freddiemercurystwin]

So much confusion in one small thread!

 

[OM2]

Thanks for all replies
I never knew I had so many replies!
@JohnD it's a serious thread!
The car is a Tesla Model 3
I'll try and take a pic to show you all in the daytime

@cdbe thanks for digging up my old posts ❤
Can you make the font bigger, I don't think everyone was able to read

 

[RrogerD]

I think that this post is a p!55-take!
I have absolutely no idea what is being asked.
Nobody uses a wrench for a screw
What is wrong with a screwdriver?

 

[Deluks]

Clearly, the number plate screws in from the back, and there's not enough clearance.
Which would suggest that additional parts of the car need to be removed for access.

 

[morqthana]

I have absolutely no idea what is being asked.

Clearly.

What is wrong with a screwdriver?

Nothing, if it's less than 15mm from the end of the handle to the tip of the blade.

Can you tell the OP where he can find one?

 

[foxhole]

Lots of videos showing how to change plates on Tesla 3, no screwdriver required.