Tumble Dryer

[jc1985]

Hello. I got a condenser tumble dryer but the waste pipe doesn’t fit the drain connector under the sink. Is there a particular adapter I need? Thanks in advance.

 

[CountryFan]

I think it might have to go to a standpipe, or make your own arrangement. Not something I’ve seen an adapter for, but haven’t really really looked.

 

[Koolpc]

Tumble Dryer 10mm Adapter Kit - BSP Waste pipe plumbing condenser driers | eBay UK

Tumble Dryer 10mm Adapter Kit, including Swept tee 1½", BSP nut x 1½", BSP thread. Nozzle adapter end 9mm at thinnest point 10mm at thickest.

www.ebay.co.uk

 

[CountryFan]

Tumble Dryer 10mm Adapter Kit - BSP Waste pipe plumbing condenser driers | eBay UK

Tumble Dryer 10mm Adapter Kit, including Swept tee 1½", BSP nut x 1½", BSP thread. Nozzle adapter end 9mm at thinnest point 10mm at thickest.

www.ebay.co.uk

Must have missed that one

 

[jc1985]

So it turns out the pipe on my model is optional. You just need to empty the tank that holds the water after a few loads. The pipe doesn’t reach anyway so would need to source a longer one. Thanks