OMG my brick slips are here

[Highway Man]

looks good - are you doing the sides?

we was but then thought we might leave it at the chimney as a feature.

 

[Highway Man]

looks good - are you doing the sides?

do you mean the sides of the chimney breast or the side walls next to the chimney

 

[Highway Man]

 

[pete01]

I set them out to work this way. It's called skill.

Doubt it

 

[Highway Man]

Doubt it

I set the joint size to suit as I couldnt be arsed to cut them all.

 

[Highway Man]

Doubt it

Thomas

 

[Charlie George]

Looks like the Wailing wall with all them notes stuck in it

 

[Highway Man]

Looks like the Wailing wall with all them notes

yes on the pictures, I cannot work out why it looks totally different looking at it in the flesh, look a bit naff on the pictures but trust me, it looks amazing

 

[Charlie George]

yes on the pictures, I cannot work out why it looks totally different looking at it in the flesh, look a bit naff on the pictures but trust me, it looks amazing

The wall looks good the pointing can be a bit of a faff.

 

[Highway Man]

The wall looks good the pointing can be a bit of a faff.

yeah not looking forward to that part, I bought a mortar gun to see if that makes it easier.

 

[Koolpc]

yeah not looking forward to that part, I bought a mortar gun to see if that makes it easier.

Cartridge or belt fed?

 

[Highway Man]

Pointing up this week then we have a street artist booked in to do some tasteful graffiti and street art onto it then we are done.

 

[Scally-Ho]

@Highway Man Don't panic H M. Get hold of your disc machine and carefully round off that corner AND the opposite one to match. Then with fine compound, polish both corners up to a nice gloss finish.

 

[Koolpc]

@Highway Man Don't panic H M. Get hold of your disc machine and carefully round off that corner AND the opposite one to match. Then with fine compound, polish both corners up to a nice gloss finish.

He is sending it back...

 

[Highway Man]

@Highway Man Don't panic H M. Get hold of your disc machine and carefully round off that corner AND the opposite one to match. Then with fine compound, polish both corners up to a nice gloss finish.

Wished I had seen this first. It’s on its way back now. I am hearth less