Anyone used a kit like this to screw/bolt a toilet down
- Thread starter tomsim
- Start date
Just make sure that your hole is deep enough, put plugs in, put pan in place and plastic liner in hole in pan. Screw nut onto threaded part, put screw through pan and into plug then screw it into plug till tight.
Ah I get you put the bolt and nut in, in one go after the pan is in place. These fixings are usually ok then? I did think of throwing and using screws
never seen a pan fixing kit that uses screw bolts before. Are they just plastic nuts?
2 usual kinds of fixing kits these days, depending on the toilet. Side fixing with plastic L brackets or top down fixings with screws and caps for old school screw down through the pan.
Side fixing -------- Top down fixing
____
2 usual kinds of fixing kits these days, depending on the toilet. Side fixing with plastic L brackets or top down fixings with screws and caps for old school screw down through the pan.
Side fixing -------- Top down fixing
____No they are chromed metal dome nuts
Couldn't see metal nuts in the bag for looking, just the plastic sleeves
- Joined
- 27 May 2011
- Messages
- 2,246
- Reaction score
- 1,199
- Country
These are very good fixings IMO.
The plastic bush enables a solid fix without risk of damage to the ceramic.
The plastic bush enables a solid fix without risk of damage to the ceramic.
They were excellent. Thank you
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
