Shock arrestor question.

Joined
27 Feb 2017
Messages
54,259
Reaction score
13,262
Location
Essexshire
Country
United Kingdom
Now I have my leak/vibration problem sorted (had the Main Street box replaced), I’m now getting a 'bang' when either the upstairs wc system fills and shuts off suddenly, or I shut off the 1/4 turn cold tap in the kitchen quickly. Pretty sure it’s to do with our water mains being replaced and the pressure is just over 4 bar. The water board employee measured it a few weeks ago and told me the pressure. I was thinking of fitting shock arrestors to the feed to both those lines. Is tgat the right thing to do and if so, would these parts be okay? https://www.unventedcomponentseurop...MIxZr6mdXplgMVJ6NQBh1HkACeEAQYBiABEgIlDfD_BwE

If not, any suggestions of what make to use?
 
Now I have my leak/vibration problem sorted (had the Main Street box replaced), I’m now getting a 'bang' when either the upstairs wc system fills and shuts off suddenly, or I shut off the 1/4 turn cold tap in the kitchen quickly. Pretty sure it’s to do with our water mains being replaced and the pressure is just over 4 bar. The water board employee measured it a few weeks ago and told me the pressure. I was thinking of fitting shock arrestors to the feed to both those lines. Is tgat the right thing to do and if so, would these parts be okay? https://www.unventedcomponentseurope.com/2-x-0-16-litre-shock-arrestor-potable-mini-expansion-vessel-15mm-tee-twin-pack.html/?utm_source=Google Shopping&utm_campaign=Copy Unvented Components Europe&utm_medium=cpc&utm_term=adtribes&gad_source=1&gad_campaignid=17178278874&gbraid=0AAAAADCTOYCQijEm3sGj-dL6j18uCSitx&gclid=EAIaIQobChMIxZr6mdXplgMVJ6NQBh1HkACeEAQYBiABEgIlDfD_BwE

If not, any suggestions of what make to use?
yeah they look cheap enough. BES.co.uk have some too, dearer.
Check if you have any taps anywhere which rarely get used. They can have a bubble of air behind them which can cause a bounce. Just open them to clear.
Banging pipework often gets better by itself. Air dissolving in the water at a high point, maybe.
 
Another question. Can I fit a shock arrestor anywhere on the cold water main to absorb the shock when a tap is switched off?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top