Recent content by Adam09

Thanks for the replies. If I was to take the staircase out completely, would it be a easy enough to build a staircase myself? This time cutting stringers for both sides, bolting them to the wall, and then use plywood for the risers and treads? Would I need just the 2 stringers or a 3rd...

Hi guys, thanks for explaining how the staircase is constructed. Would it still be a massive task if I had access from behind? As the pantry is underneath the stairs. Obviously I would have to pull the sloped plasterboard ceiling down and replace it afterwards. (not that great anyway). The...

Hi guys, I was looking to replace the treads and risers for my parents. I have never even thought about doing this kind of thing before, so please be gentle! :D I was expecting to remove the treads/risers, to find stringers, then cut new treads/risers out of a sheet material then fix them...

Cheers lads! 8)

Hi guys, I have just tried using the flush trim router bit, following my template, trying to cut the exact same shape in 18mm MDF again, but it appears to be struggling/burning. I have just tested this with 4mm MDF, and it was fine. Do you think it will manage cutting in 12mm MDF...

Hi guys, Do the flush trim router bits work well with MDF? I was looking at purchasing this one to use with my Makita Rp0900x router. I have a shaped/curved piece of 18mm MDF that I would like to use as a template, to cut out in 12mm MDF several times. Cheers, Adam

Hi guys, I would like to use this photocell for switching 2 sets of low voltage decking lights, which each have a plug-in transformer. Could I add a 13a FCU onto the kitchen ring main, supplying 1.25mm² via flex outlet, connected to the photocell (straight through the wall into the...

Reading the original post, it sounds like the bathroom is now complete, and the pictures are from a build log or something. I bet it's your transformer, so get cutting into that ceiling! I have used them starlight kits before, and heres the instructions if anyone requires them

The water temperature knob? Also, will the diverter valve got back to normal itself once I turn the boiler back on? Sorry for all the questions lol Cheers, Adam

Ok mate, thanks! How do I go about closing this then? I'm trying to flush my CH system with this guide: http://www.diynot.com/wiki/plumbing:flushing_heating_systems which states: or will it still work? Cheers, Adam

Thats for the reply. I actually meant the main 22mm flow and return iso valves. I just took a picture: Or are these not the type of valves which leak? Cheers, Adam

Hi guys, just read in the wiki how to flush my combi ch system out with the mains water filling loop. It requires me to shut off the flow ISO valve, but mentions that some once shut off, will leak once turned back on. Could anyone tell/show me which type are prone to leaking? Cheers, Adam.

Hi guys, Is it possible to use JG speed fit fittings with Hep2O barrier pipe as long as I use the correct Hep2O pipe inserts? Or is JG barrier pipe better than Hep2O barrier pipe? Cheers, Adam

Hi guys, I need to add a radiator into my converted garage. The boiler is in there in its own cupboard, and I have access to the main 22mm flow and return pipes. These have already being tee'd off directly under the boiler and reduced down to 15mm pipes, with 2 radiators splitting off in...

Hi RF, I will do this, but with a single socket and one transformer, as the kit states I can purchase extra deck lights and have up to 20 lights on one kit. Thanks guys! Also, whilst I'm here, I'm looking to purchase a flush ceiling occupancy pir. Has anyone used a MK K5015? Or a...