Recent content by AdamGT3

We are planning a small kitchen extension and wondered if we fall within the current PD rules..What we have done to date is: 1. Conservatory about 9 years ago that was within PD (70cu/m) 2. Large extension with planning 4 years ago, plans showed said conservatory; The extension is at the...

Thanks and not thinking yo are bing awkward all advice alwayd welcome!! :wink:

My only concern is risk of damage as its in a garage and will run under a door other than I see no reason why not and nothing in the regs, etc. Wanted to check with the people who are experts on here!!!

Is it permitted to clip SWA cable in a garage to the wall horizontally just above the floor level? The only alternative is to add 20m of cable, add a junction box and clip to surface of wall up to roof space and go into roof clip to rafters and through 2 walls and down again to get to CU?

Sorry for the confusion. The RCD is remote from the CU. The CU is a LLutron homeworks panel that only has MCB's protecting each lighting circuit. The RCD is in a metalclad box in the garage 3 meteres from the Lutron panel so there is T+E from CU (lutron) to the RCD (in a hager metalclads...

Thanks Spark, just to be clear for the outdoor lighting circuit that goes through the RCD if the RCD trips I should test R1 +R2 for the link from CU to the RCD and a separate test from the RCD to end of circuit. Same for IR? Thanks Dingbat will give them a call.

Thanks for all your help to date ... hopefully doing courses this year if NICEIC e-mail me back re dates!!! WHat is the correct way to test and record results for the folowing circuits: 1. Main CU - RCD - 12 outdoor lED lights (mains voltage) Do you test and record R1 + R2 with the...

Conversion box basicallly junction box with various knockouts for swa and normal compresion glands. Takes SWA and connects to cable for garden supply switches that dont. The garden switches for pond take 9mm cable max. Blagdon pond switches are the ones supplied which will not take swa.

What type of cable should be run for the following: I have 10mm SWA from main CU in house to CU in Shed and again SWA from shed underground to decking where there is a conversion box. What cable should be run from the conversion box (attached to the deck) to the socket outlet (also attached...

Ban All Sheds Talking of inspection whilst Part P etc not detailed on the laying oo the cables what is recommended for lining the trench we were going to do 20mm sand - cable - 50mm sand then soil even though no sharp stones and at 6-700mm its all clay! Is this required, if not what is...

INTERNAL first fix!!

Thanks all. BAS - The Council has confirmed and the Council electrician has already been to sign off internal first fix (and did so). Supply is TP&N so would rather take from one of the phases as designed from the TP&N board. Re the earth I dont want to feed from an RCBO from the Board...

Hi I need to run power to a shed at the bottom of the garden. Whilst there are a few posts on the subject here I wanted to ask what is the BEST way to do this? This wil be signed off by the council when complete! I have a spare fuseway in the main consumer unit. Should I add a MCB or an...

Sorry dont know much more about it or what to say. Was installed by a plumber last year who is now miles away. Just know its sealed. Large hot water tank next to boiler, expansion vessel there to at 1.5bar. T junction where the returns meet seems to be where the problem lies as the water...

It appears I ahve an airlock where the upstairs and downstars returns meet. If rads are on as normal no heat in upstairs radiators. If I trun all down stairs off I get heat upstairs. Since this has happened and just prior, very noisey in the pipes where the returns combine. Any ideas how...