Recent content by adamneve

I have 3 sef contained flats which run from the same common water supply. The problem is that they suffer form low pressure when at least one tap is open. After talking to neighbours it seems its a common theme even in singular households dependant on time of day. Has anybody experience of...

Yes the CSI 85 AAA (T) 780 SERIES 'high performance combi boiler' Bit like the Gxl or Ghia of the range i think :mrgreen: have you had experience these electro-mechanical wonderments transam? Siyabonga

Thanks for the input fellow Hominins I have decided to go with the new model Ravenheat (dont laugh) My decision deciders; 3 years warranty 1200 + vodka and tonic for 3. The worcester was 3k+ for 3 Intergas same and my plumber cant get me the extra warranty Apparantly the new model is...

The intergas looks favourite. Any Intergas installers in the Neath South Wales Area want to give me a price to fit the three? All in the same building to swap old vaillant combis. Apparantly you get five years if you are a registered installer. Cheers

Thanks for the info comrades Never heard of Intergas and Remeha but look very good. the intergas looks an amazing boiler and with the 'less moving parts'concept is tempting but the warranty is only 3 years it seems.Anyone had any trouble with these and long term installations? i have...

Hi I need 3 Combis A Rated with best warranty (five years would be nice) all 24-26 kw would be ok as all 2 and 1 bed flats in same building. any pointers? thanks

thanks scw and Mickey I am at the moment running the boiler d0 at 19. So at that rate does that mean the flow rate required is halved? When temperatures drop i increase it to 25-30 You would think that the electronics would automate this process?

Mickyg Pump has been uprated to a 15/60 so whats the next step in pump size? Tony the whole heat loss is 20kw plus the DHW at around 5kw I know the boiler is well over rated but i am planning a major extension later so i bought this with that in mind. Steve

Thanks for the replies The boiler is an ecotec 38kw boiler All pipework is in accordance with the installation manual The pipework to the cylinder is 28mm down to 22mm at the motorized valve. The cylinder is 6 metres away from the boiler with a head of 1 metre. My point is this that in...

HI Seems to me that S53 is a design flaw My system 5bed house 18 rads 438 ecotec open vented 15/60 pump 3 x single port valves zoned to cylinder/upstairs/downstairs 2 room stats upstairs and downstairs Cylinder stat Bypass valve at 4 bar 22mm pipe downstairs 28mm pipe to cylinder...