Yes I was concerned the zone programs may of been wiped but they seem ok.
At one point I put my code in twice then pressed reset, maybe this just reset the code back to default ?
I wasn't sure if when it was set if the zone lights for the set zones should display but I checked with next door...
Fixed - I put the new battery in but it was still the same.
I had read that the master code/reset is 4321, so i thought I'd try that and it worked !
For some reason the code was reset, maybe with power being of for so long ?
I've put my original code back in and tried the different zones and all...
I had a power cut whilst i was at work, when i came home the light was still flashing, i put the code in and pressed reset, all was good.
Now when i try to set the alarm by putting the code in I don't get the alarm set beeps ?
Would a new battery help ?
Thanks for any help
The remote I bought was a 433mhz keeloq rolling code remote, looked identical to my originals.
Yeah the original that stopped working, the spring terminals are fine, I press the button on it & the red light flashes, it just wont pair up/register.
I phoned Cardale who just gave me the information that's in the instructions, Ansa was a bit more helpful but what they suggested never worked but was right in one aspect. Ansa said even though the replacement remote I bought from Ebay looks identical in everyway it won't work.
I ordered a...
Thanks for the reply - To reprogram the remotes, I have to delete all remotes first, then reprogram them all together, only one of the remotes is bein recognised when I try to reprogram.
I have a Nov 2004 Cardale Thermaglide Roller Shutter, I have a problem with the remotes.
I use 2 remotes, recently both have been intermittent so I thought Id change the batteries but was still the same.
I then thought I'd reprogram both remotes, now one works perfect but the 2nd won't...
Thanks for the reply
We have done a full defrost, we left it for 24 hours and switched back on etc
A day or so later we checked the drainage channels in the freezer and they were blocked solid with ice (never defrosted properly the first time), we got a hair dryer on it and defrosted...
Hi
My Parents have a Hotpoint Mistral FF60, If the fridge & freezer is warm.
Ice cream is not hard
They have thermometers in both compartments
Freezer is reading -15
Fridge is reading +10 ......... fridge setting is turned up to number 8 with 9 being max
I believe this model of...
Just to update/finalise this thread - I've fitted my TRV's, I went for Siemens TRV's from Screwfix http://www.screwfix.com/prods/71015/Plumbing/Radiator-Valves/Siemens-MTN51GB-White-Chrome-TRV-10-15mm-Angled Bi-Directional and Liquid Sensor.
I fitted 8 TRV's and also fitted a Salus Digital...
Yeah I will do, I got a litre of Sentinel to go in aswell, so goin to see how it runs over the next week and then put that in aswell.
Thanks Again for all the advice :wink: