Recent content by alwest197

Should have mentioned we only change the lemon after about 5 dishwasher uses.

Both my son and I had this issue...different water areas so nothing doing there. We tried all the usual stuff..pipes, using vinegar, various proprietary mixes, stripping all the gubbins out and cleaning. All to no avail.. more by accident than design we tried putting half a lemon in the utensil...

ok, thanks for your reply.. I have to admit to getting a bit bitter and twisted as I've always had helpful advise from the site in the past. I've ordered a new micro-switch which may or may not be part of the cause but it was a suggestion from another site.. I fear its more likely to be a...

Sorry I forgot... The flux capacitor is working well... see you in the future

interesting.. I've been using this site for years.. but you seem to have become be a self appointed Health and safety team. If you cannot or do not want to answer the question may I respectfully, because I appreciate the expertise that's out there, request that you do just that. Whilst...

I think the answers in the title of this forum.....DIY. :) I never touch the gas side only the water and electrics. so any ideas?

Forgot to mention it had a new PCB about 2 years ago.

Hi, I've got a baxi 105e which is causing me some issues. It started with the DHW going cold and then hot again then cold again. I cleaned out the DHW HE to no avail so bought a new one and fitted that to no avail. The hot/cold thing only happened intermittently. Recently the 60 degree light is...

We have an Electrolux electric double oven, Model EOD983X2 / 944171091 . Just recently we noticed that hot air was coming out from around the main oven door. After checking the door seal and finding it to have deteriorated somewhat I bought an authentic replacement from Electrolux. After looking...

no heating, just want to keep out a bit of the cold. Thanks for your reply

Its simply for the garage door. Last year it got very cold so I used cardboard to try to keep the cold out. As you say I don't think the foam idea is feasible. I'll have a look at using metal backed polystyrene foam slabs instead. Thanks for your help

HI, I have an uninsulated garage door...ie bare metal. Do you think it would be possible to use the foam stuff they use for filling in around holes in brickwork to give it a coating which would provide insulation? Regards Al

Thanks again, I'll give it a try

Thanks.. I do not have any wired extensions as such. The phones are panasonic cordless ones of which I have three including the base station. We were getting a lot of noise on the line so I disconnected the Sky box and the burglar alarm from the socket. whereupon the noise seemed to disappear...

Thanks for these replies. The issues I had with the BB have been sorted so I have no problems with that. It's the myriad of connections which I would like to sort out. Ideally I suppose it would be better to bring the wires into the living room rather than through the porch then the hall then...