Hi, I have brought the following bath from B&Q.
GoodHome Nakina Gloss White Acrylic Back to wall D-shaped Double ended Bath
https://www.diy.com/departments/goodhome-gloss-white-back-to-wall-acrylic-d-shaped-double-ended-bath-l-1600mm-w-750mm/5059340340043_BQ.prd
For any previous back to...
Yeah it has ISO valves to the heater which made me think it was from the water supply. Didn't think you were supposed to put ISO valves on central heating. Anyway, they're below the ceiling and I want to cap it off above the ceiling.
Thank you. I've got to add a radiator into the room so I'll drain the system. As a DIY'er I've not heard of the other methods.
I assume once I've drained it I can cap it with a compression or push fit stop end? I haven't braved soldering yet :unsure: I've drained my CH a few times to change...
We're currently in the process of remove our old kitchen and have a electric heater above the door. I have not seen one of these before! Are the two pipes from my central heating or water supply? As there's stop valves on the pipes I'm making the assume it's from the water supply. Unfortunately...
Hey. Fantastic work.
I see you've put the range cooker in the chimney. Have you got your extraction up inside? We're planning to do the same at our place and have been looking at telescopic hoods that recess into the chimney.
Thanks everyone. It's reassuring to know there's a solution.
I plan to place channel drainage below the bi-fold. My immediate concern was the 30mm of exposed brickwork which as 'God' has suggested I'll resolve by placing a 50 x 25 aluminium trim over the brickwork with a batten and drip groove.
Hi, I recently had a set of bi-folds fitted without a sill as I wanted to have a level floor inside and out. The frame has face drainage and a weather threshold but as the doors are set back on the outer cavity wall I'm left with 30mm of exposed brick on the base. I have a DPC on and behind the...