Recent content by baileyboy40

thanks for that boilerman2, will fir the right valve

Did you ever sort this out. I have the same problem, was advised to fit this valve instead of the v4044, could really do with some help with the wiring steve

Maybe if i had googled it instead of taking notice of an oil engineer i would'nt be on hear asking

was advised the v4044 was old and hard to get hold off and that everyone was replacing these valves with the v4073

Hi everyone, could really do with some help. We have a 18 year old worcester heatslave 15/19 oil combi The old v4044 divertor valve packed up. I have fitted a v4073 to this boiler but could do with pointing in the right direction with the wiring, as it is a heatslave it is on a w plan . have...

hi, thanks a million for all your replys guys. my next question is, what sort of citric acid should i use and any ideas where i get some from

now the impeller is not spinning at all, is there any way of cleaning it out and getting it working again

what happens is, the pump sticks so the lad in this house has been spinny the pump with a screw driver, 1 turn and its normally away, this last pump though doesnt matter how many times you spin it, it wont kick in

yeah it is a mini ok. we have had about 6 of these fitted. will never have ideal again after this, there attitude is not the best

any ideas, if we flush this system again and refit fernox, will ideal honor the warranty or is these water samples a cope out by them

hi again, system was flushed and fernox fitted. ideal have tested the water, they say it is clear at the pump but say the radiators still have flushing agent in them. have read up on alot of ideal posts, to see that they often put problems down to this. one of my main points is with this is...

hi, has anyone else had a problem with the pumps on these boilers. this boiler has had 4 pumps in 3 mths