Recent content by blacknesh

I did mean w not kw, I think il just leave it with the eletrican and try different bulbs as time goes on, many thanks anyway,

There good, you don't need your heating on, and I feel a little more tanned

I did mean 40kw of lighting I was thinking 8 x 5kw led = 40kw, guess this was wrong,

I'm looking to get led spotlights installed, but I'm a little lost by the amount of spots lights required, my living room is roughly 4m X 5m and currently have a 13w light in the center of the room, my friends brother is a electrician and said I would need 8 lights, but if I installed that with...

Yer that's ok I'm a plumber/gas, the clock cost £140 with the vat, and I charged 80 to supply and fit, so £220 total, you could get a different clock instead if you wanted, the worcester one lets you set times for the hot water preheat, not really worth getting but the customer wanted it, only...

No way to reset, it ended up with a new clock, this is also the boiler display, did you have a powercut by any chance

Yer clearly didnt read it correct, but why bring oil into it to confuse matters.

45kw, didn't realise? went did that come out, as last I knew it was 70kw and pipe sizing no bigger then 35mm?

They could do a factory with offices needing this kind of kw, the rads would be normal sizes just lots of them, the biggest boiler I ever fitted was a 42 kw, as a domestic installer you can't exceed 70 kw anyway, you asked him if he's gas registered?

Sure he meant 100.000 btu not kw

Worcester green star cdi, hot water clock flash 026 there's nothing in the book or the programmers instrustions which is a dt10rf, it's only a year old and I see only one other person on the web seems to of had this problem, but no one as posted a answer

I was going to brick up a builders opening and fit a flueless fire In its place but am I right in thinking the builders opening still needs ventilation to prevent damp, if this is the case is there anyway around this as i can't have and vents near the flueless, many thanks all, and merry Christmas

evening all, what size adhasive spreader do you tend to use on ceramic tiles 400x150, also the window reveal is 230mm deep which means i will need to brick effect on this too?, i have seen bathrooms with brick effect around the room, and single tiles laid on the base of the window reveal and the...

Found it will post there next time no hard feelings

Ok I am gas reg I don't know what the cc is if you point me in the right direction I will post in there from now on