Of all the kind folk that have offered advice on forums - yours has been the most sound and logical.
I respect that , and wondered if I could pass a quick question past you please ?
e mail if its easier
I have literally just downed tools after removing the blockage , and adding a good quality filter.
Result , ALL rads are so hot I can barely touch them.
I have installed a couple of litres of X400 system clean , and will drain down again in a week or so , flush out than add X100 inhibitor...
I currently have a supply running from my house to my New Garage that is fitted with a Garage consumer unit , and is fed by SWA cable buried at the appropriate depth.
At the time of installation , the SWA was run through an empty garage of mine , which currently has now power at all.
Sir - I truly appreciate your wisdom
Well , I got the magnet out , and the part of the pipe highlighted by the yellow arrow is indeed magnetic,
This pipe is fed from the small tank in the loft , so I am guessing I have the correct pipe.
No other sign of magnetism to date
Is cutting this...
my really old large house used to be a real mess in terms of several old heating systems that were cobbled together and extensions to it.
Not to mentions redundant pipework from Back boilers and a Rayburn/Aga style device in the kitchen.
Now - I have the original gravity fed Potterton...
thanks for your reply.
As mentioned , this is not my speciality , so such calcs are a bit over my head to be honest.
Im wondering if a pdf attachment with the layout on it would help?
first post and please excuse me if my terminology and understanding of this dark art is poor.
My 5 bed house started out as a 2 bed cottage , and I bought it in its extended state.
It would appear that the heating system has been extended in a haphazard way.
I fully understand that the...