Having examined this system further I now note that there is only ONE shocker on the zone I want to replace viper(old for new) I. E. On a window.
does this affect any answer?
for clarification the new viper has facility for seven connections:-
New Viper potential connections are...
There are 2 shocks on this zone. One covers a window and the second covers a window plus door entry.
the shocker being fitted is a honey well viper GL, this has seven connectors:-
1= Set
2= 0v
3= +12v
4 & 5 = Tamper
6 & 7 = Alarm
I have negative wired to connector No2
I currently have a scantronic9448 with viper shockers fitted to windows using four core original wiring.
I have to replace a broken shocker, I have wired the new component with :- negative to 2 positive to 3 with yellow and blue to ports 6 & 7.
alarm arms and is activated when rapped at window...
To all who responded about my alarm problem I would to say thank you for your interest.
Having just joined I was not aware of etiquette on edit/post new reply,next time I will make it clear.
however I'm grateful to "Sparkamarka" who suggested the problem was due to a blown aux fuse,this turned...
Thanks to Sparky mark a and Nerdish nerd for your helpful comments.
I'm afraid Europlex comment was not as helpful and seems to have put others off from contributing.
I was looking for help with my alarm problem not to start a war!!
After having new windows fitted and refitting alarm contacts I find when I enter my code my "DAY" light moves up and down all of the zones,pauses ,blinks and moves to next zone . Also when keypads are pressed sound is muted (just audible).
What is problem how do I fix?.3
Alarm is a Scantronlc 9448.