I currently have a scantronic9448 with viper shockers fitted to windows using four core original wiring.
I have to replace a broken shocker, I have wired the new component with :- negative to 2 positive to 3 with yellow and blue to ports 6 & 7.
alarm arms and is activated when rapped at window but the neon continues to flash even after reset code is entered.
any views on how I can resolve?
regards
I have to replace a broken shocker, I have wired the new component with :- negative to 2 positive to 3 with yellow and blue to ports 6 & 7.
alarm arms and is activated when rapped at window but the neon continues to flash even after reset code is entered.
any views on how I can resolve?
regards