Recent content by cj123

  1. C

    Leaky elecrtic shower

    i have a drip coming from where the hose joins the shower box and this come out of the head and i waste alot of water is it possible i need a new washer in the electric shower.The shower is a triton as 200x how do i get the front panel off? i have un done the two screws but it stll doesnt cme...
  2. C

    cutting tile holes

    Ive got two more tiles to put up. they both need shower pipes to come through i need a 32mm hole for the shower. Ive brought a tile hole cutter and it doesnt work they are cermaic tiles and im pulling out my hair on a way to cut a perfect hole 32mm in both tiles? please help
  3. C

    any one used a freeze master?

    thanks and when you have done ypur work how long till the ice plug melts so you can check fro leaks? and can you speed this process up?
  4. C

    any one used a freeze master?

    I have just brought the freeze master and havent used one before any one no the best way to tell when the water is frozen so i can cut with out worrying about water coming out? thanks
  5. C

    Shower hot not working

    My shower has suddenly stooped on the hot side its thermostatic shower and the cold come out really powerful but the hot doesnt come out all of a sudeden? any ideas
  6. C

    Diamond core drill?

    any tips for cooling it down?
  7. C

    Cutting in to wall

    do you advise to buy a angle grinder?
  8. C

    Diamond core drill?

    Im going to drill through a outside wall with a new 110mm dimond core drill bit for a new toilet ive got a 24v drill and a new diamond core drill bit(110mm) and tips off any one?
  9. C

    outside bath and shower waste

    Im putting in a new toilet and am going to run in to a soil pipe three meters away do i just cut in and use a three way T?and also can the bath and shower waste join the new soil pipe nad how?
  10. C

    Cutting in to wall

    im running shower pipes up a already tiled wall i have replacement tiles to match. whats the best way to get a one row vertical line of tiles off with out breaking the other tiles and without using a angle grinder(havent got one)? thank you
  11. C

    best way to take tiles off wall

    Im running a new shower in bath room and need to cut into the tiles and wall to run new pipes up, and then replaced the tiles ive removed. i need to remove a vertical line of about 6 tiles 250 x 250 tiles, whats the best way to remove these tiles without breaking any others?
  12. C

    drilling through joists and plastic cistern?

    just a quick question whats the best way to pass pipe through joists is it with a chisel or hole saw etc..?and the best way to drill through a plastic cistern for a new cold feed for a shower pump?
  13. C

    hot supplyed pumped, cold on the mains?

    wheres the best place to put the prv? is there differnt prv for diffenrt pressures?or can you change the setting?the pump is 1.5 bar and the mains is around 2 bar depending on time of day?
  14. C

    hot supplyed pumped, cold on the mains?

    the only way(because of the pipe work) i can run a pump to the shower is using a single impeller on the hot and run the cold off the mains to a thermostatic shower?any one see any problems with that?
  15. C

    HELP!! Most of downstairs light wont come on?

    the light i tried to fix i took off and the cables hanging out does that mean it breaks the circuit thats why?
See more
Back
Top