Recent content by Dan Dan the Gas man

email now available..........although my posts were not meant as a slur on any particular product, just helpful advice despite only joining today. Dan

You are kidding me aren't you!!!!! Flushing? haha I am an operations director for a company that installs for local authority contracts...To our ISO QA procedures, benchmark and industry standard......Although I don't fit them personanly, but yes....WE have fitted 14 units a week at peak...

Excellent, thanks mate...and finally.... Osmo HardWax Oil (Polyx-Oil) or HardWaxOil (manufacturers brand) ? Dan

TAKE YOUR EYE OFF THE VITODENS!!!

The Viessmann Vitodens is great (if all you are concerned about is the stainless steel heat exchanger) other than that in my experience of fitting at least 500 vitodens 100's (Combi & systems) in the last 2 years as specified....I wouldn't touch them with a barge pole!...feel free to contact me...

ACL RT212....you can't beat them!

How old is the system? Have you got Thermostaic radiator valves? Both other posts are possibles, just check the valves are open on both ends of the rad too!!..Wind them both closed then open aain.

Ok, feel i'm getting somewhere and I am a stickler for READING ahead and doing things right.!! 2 more questions and I recon i'm on the home turn. 1. I saved a bag of dust from the sanding process to mix with some sot of filler for filling the gaps, I note there are fillers just right for...

Hmmmm So I see....interesting website, lots of products that look right too....just not sure how to proceed still.

Ok, I have read a number of posts all helpful, some contradictory though. I exposed a beautiful parquet floor 10 years ago, alas...2 kids...not enough care and the floor looked 'worn'. I have now sanded it back and taken off the complete top layer aprox 3mm....looks good again now apart...