Just to clarify there won't be a raj 1.2m long it feeds back all the way through the kitchen so about 4.5m with a 1.2m overhang. Above the long run it is brick wall to loft level with 2 doors and above the 1.8m run it is brick but only 1m long to loft level I could take this down and change it...
Hi All
I've done rsj's before but always wall to wall. This time what I would like is remove a wall in the kitchen which is straight forward wall to wall but would also like to remove a nib in the living room which is an extension to the wall in the kitchen. My plan is to extend the kitchen rsj...
hi thanks for your reply
as far as lintels go then what would you recommend the concrete lintels both sides or an rsj one side and concrete lintel the other
Many Thanks
Dan
hi thanks for your reply
basicaly it is a an 1901 house. The wall is two leaf the door will be on the ground floor above this there is a bathroom and the bath is at that end of the room so potentail a bit of weigh. I was thinking about it last night i think i'm might go with a 6x3 rsj inside...
Hi all hope your all well
Just a quick one really. I'm making a hole in a supporting wall for a 4ft wide door. The joists sit on the internal leaf of the wall the the external wall is just the wall above it.
Am i right in thinking a pair of acros inside supporting the ceiling would hold...
Hi could it be as simple as the temp sensor being in the wrong place or the o/heat stat or even them being the wrong way round for example the o/stat first then the temp sensor such as
------tempsensor-----o/stat--------heat
Many Thanks
Daniel
hi all just an update and more help if possible.
Iv changed the pressure dif switch and diapram i have also changed the o/heat stat but still seem to have the same problem the heating comes on for a while and then dead gone until the pump stops and i switch it off at the mains.
The reason...
hi this may seem a bit of a stuipd question but which one is the system flow switch i'm thinking you mean the pressure differentail micro switch am i correct
Many Thanks
Dan
hi thanks for your reply
I can here the pump still running. is it a matter of a replacment you is it just a build up of gunk on the flow switch
Many Thanks
Dan
Hi all hope your all well and have had a good weekend.
I have a major problem with my boiler i have a glowworm 100e the main prolem is it cutting out. The lock out light does not come on but the boiler doesn't work. This seems to be a intermitant problem.
The boiler at first seems to work...
Hi all could really do with your help the boiler seems to work fine if you set it up for times for example have it come on for 30mins and then off for 30 mins it works fine i can get water when ever i need it when it's like this. I can on assume it's some sort of sensor that when the boiler has...
Hi all i'm after some quick help i have a glow worm compact 100e that's got a problem but i'm not sure how to solve it. The problem is the boiler works for a while and then the boiler gets to temperture and switches the gas off as normal, the problem then arises in that when it wants to switch...
Hi all i'm after a bit of help. I'm starting to build a conservatory and was just deciding the best way of doing things. I have a huge concrete slab on 80% of where the conservatory is going to be going. My qustion is, is it ok to build the dwarf wall on the concrete slab if so what min depth...
Hi all
Basically i would like to add french doors to the bottom of my kitchen but not sure what the maximum size could be the wall it's self is quite small on 8ft. After looking around on the internet you could if you want put 6ft french doors in but i'm not sure if this would be ok what...