Recent content by DannyFlash

dont mean to sound stupid.... but is the shower electric?? :oops:

The vid was what swung it for me, and it really is that simple to use! The trick to get a great finish, is to do short sections like 24ins or so, that way there is less chance of a "skin" forming on the silicone, chaulk or whatever your using. Have fun with your fugi!

As far as i can understand, there are apparently two types made for this model... either Honeywell / ACL, or i have heard something to do with a meatal or plasic head?? Does it matter which one i get, if it does, where abouts in the boiler am i likely to find this DV? I have been told that it...

Hi all I have found a product called "Fugi" does the job absolutley smack on!! Got loads of different edges to different sized beads etc.. http://www.plumbworld.co.uk/0-13240 Great tool, less sticky mess too!! Have a looksy! It really is a must for a perfect job every time! I have one...

Thanks for that, i suppose it is out of my league to have a go at replacing it?? I know that it involves a drain down etc, but would it be that hard to do if i knew where i was looking? Have done a few basic plumbing jobs before i.e installing a Rayburn etc...Dont fancy shelling out £350 for a...

http://www.diydata.com/problem/condensation/condensation.htm Take a look at this link, might help i dont know!

Hey all, just a quickie, i'm sure it's not a difficult question, but just need a bit of advice...... I've got a WB Heatslave 15/19, and when we use the hot water, the 3 rads closest to the boiler come on, now at first i thought it was due to the water temp being turned up to much on the boiler...

:lol: Thanks for all your help!!, think it might of just been a load of crap sitting at the bottom of the rad!, did as directed and had a big mess on the floor!! lol was sludge after all!! Thanks again for your assistance! :wink:

Ok will give it a try if you think that would help......but I unfortunately have my doubts :cry: Thanks for your help all the same it is very much appreciated! :wink:

:? Just a quickie! I have a prob with one rad, it is stone cold!, have bled it, changed the thermostat on it, kicked it, but still nothing! the supply pipe to it is piping hot, and all the others are fine, just this one! It is the second closest to the boiler if that helps! Would be...

Many thanks for that!! hopefully the pump shouldn't be that bad, as i switched it off @ the mains when i realised where the noise was coming from! (thought it was on the telly to start with!!) so i shouldn't have to dig that deep in my pockets!! I presume this sort of thing just happens, or...

Hi there I hope there is someone out there that can help me!! :oops: As you can see from the subject above I have a slight problem, this has happened before a few months ago but the boiler has now given up the ghost, and just screams at me when it trys to get going! The boiler is only...