Recent content by dave2

I want to replace the tap head washer on an outside tap. What size fibre washer is required as a 3/4 inch is too small.

Thanks but in the end gave up. Took a trip to Maplins to buy a new one.

I have an entry camera, the type that can be bought at any electronics or DIY store. It connects to a TV scart socket. No problem with that. But die to digital switchover, thought I would use an additional switched scart socket I have and know works on another set with DVD etc. I have plugged...

Battens screwed to wall, plasterboard, seal plasterbord, mirror adhesive and morrors, with some mirror fixing screws into batten just in case. Acrylic mirror compared to glass. No thank you, you never get a true reflection. Get the glass mirror toughened. It will take a fair old bump.

There are firms that will dowder coat for you with the doors in situ.

I had a wall about 15m long and 2.4 high covered entirely. For appearance sake I had the mirros cut so they were 2.4x600 and they are fixed to the plaster wall with the mirror fix adhesive. The glaziers fitted for me an all is fine. I wanted a copule or large mirrors 1.2x1.2 fitted, so ordered...

Also, when pasting, a small amount of paste, never matter how small, does get onto the surface of the covering when pasting near the edges, which when wiped, even with a damp clot/sponge, gets diluted and spreads. What we have suggested are preventions. The cure, there does not seem to be one.

Where the seams were wiped, it is the diluted paste has sealed the paper. It does look awful and is annoying.

Still searching, if anyone can help :?:

A couple of lengths of 2.4 would suffice. B&Q do not do chromed.

Anyone know where you can buy chrome finish angle about 25x25mm either plastic or metal base such as the angle for suspended ceilings. Only 4 or 5 metre required, so not economical to have to buy a full pack of ceiling angle.

Just an update in case anyone else has been looking for the same battery. It is made up of 2 SubC type batteries with tags. So, bought replacements, taped them together and all is well. Batteries £10 replace the gadget £80. Not a bad saving.

Thanks. Did a search on that site but cant find. Do you have a link to the page?

I have a gadget that I want to get a replacement rechargeable battery for. The battery code is 2N1400SC-2.4V and is two batteries, one on top of the other, with contact lugs. Anyone help please?

Minimalist effect wanted and the board would be an irregular shape.