Recent content by Dewy

  1. D

    Knocking in tree stakes

    The only need for tree stakes is when planting trees grafted on a dwarf root stock because the roots aren't big enough to hold the tree upright. For all other trees the use of stakes causes the tree to reply on them to hold firm. It is much better to grow the trees without stakes so they build...
  2. D

    aerating a lawn

    My garden was blue clay where the soil bulldozed when making the road had been piled up then levelled after the houses were built. The topsoil was buried 3' under the new top level. This was either soggy in the winter or cracked in the summer. The top was roughly levelled and raked before...
  3. D

    Sharpening Chisel bits

    Never used one. Practice, practice and more practice over a lifetime makes perfect cutting edges.
  4. D

    Freud Router

    If these cheap cutters were dangerous they would not be allowed to sell them. Britain has a history of high prices compared with other countries which is a throw back to the days of empire when this was the richest country in the world and prices reflected that. All items are sold for what...
  5. D

    Freud Router

    Trend make good quality bits. Sets are always cheaper than buying the same bits individually. If you think £35 for 15 is cheap you should see a set I bought at £4.99 for 12. At that price I bought a few sets. They are handy as backups if a better quality bit goes blunt.
  6. D

    Help A kid..

    You can always look closer to home with UKWorkshops which I use more than the Aussie one. Som eof the contributors are well known for their magazine appearances like Alan Holtham, Keith Smith (the woodsmith Q&A page in the woodworker), Philly. One law that applied earound the world - No matter...
  7. D

    Freud Router

    6mm and 6.35mm (1/4") is a lot different, approx 14 thou. Fitting a 6mm shank bit in a 1/4" collet is asking for trouble with the bit flying out at 20,000rpm. Not my preferred method of singing soprano.
  8. D

    oak worktop care

    I wouldn't use raw linseed oil. It would never dry but remain greasy. Boiled linseed oil is the same but dries like danish oil.
  9. D

    materials

    Try making a chair out of balsa and see how long it lasts when you sit on it. The frying pan out of plastic was good reason but try making one out of lead and see it melt before the fat.
  10. D

    woodworking dimensions

    heights of chairs, desks, workbenches etc is pretty standard for the 'average' person but who is average? I have never found an armchair that is the correct height to prevent causing backache. Table 30", dining chair 18", armchair 15", workbench 36" I raised my armchair on blocks to bring it...
  11. D

    Help A kid..

    I may be a month late Naddie but why not try the Ubeaut forum in Aussieland? They know a lot more about aussie wood than we would.
  12. D

    Funny nails

    I'd love to see someone try to fit clasp nails into a brad nailer Jason. roflmao
  13. D

    Anyone near Barnet, Herts with a table saw?

    When I used to make all my furniture at home out of contiboard I would work out the boards I needed and make a cutting list then go to either homebase or B&Q who had a wall panel saw. B&Q would cut to the exact sizes I wanted while Homebase allowed 2 cuts per board and 25p a cut over the 2. I...
  14. D

    Marine ply

    Why spend a fortune on marine ply when it is going to be covered in fabric? I agree about MDF. The only use I have for it is making jigs or templates for my router because it cleans up smoothly. If you really want a ply that wont come apart if it gets damp buy WBP (water-boil-proof) for a...
  15. D

    planting lylindi conifors

    I was under the impression that the asteroid had a built in leyland cypress targetting scanner so nothing else would be damaged except the most invasive unneighbourly plant ever developed. It's no good for anything except growing to extreme heights that cannot be controlled properly.
Top