ericmark's latest activity

  • ericmark
    ericmark reacted to pete01's post in the thread Consumer configuration query with Like Like.
    Looks pretty normal, bit of excess copper here and there (hopefully the factory terminated neutrals are in properly) Usually the...
  • ericmark
    ericmark replied to the thread EICR - would this be inspected?.
    Agreed, seen it many times, the old regulation had a full stop before it referred to single core cables, which some selected not to see...
  • ericmark
    ericmark replied to the thread EICR - would this be inspected?.
    There is a problem with the English landlord law, Portable is considered as either under 18 kg or has wheels. The problem is the...
  • ericmark
    I will agree something is not right with electric tariffs. We pay a standing charge to cover the infer structure we are told, if that's...
  • ericmark
    ericmark replied to the thread Bidirectional and data sheets..
    The original RCDs were pure mechanical, no electronics were used, but early RCDs had problems. Any slight distortion when torquing up...
  • ericmark
    ericmark replied to the thread Bidirectional and data sheets..
    I think it is where something is powered from the devices output so once it trips the supply is auto broken, so when used the other way...
  • ericmark
    ericmark replied to the thread Hallway light / outside light.
    One switch is upside down to the other one see red line dividing the switch, the Com 1 and Com 2 are important. The red circles show...
    • 1778849038610.png
    • 1778849255054.png
  • ericmark
    ericmark replied to the thread Shed Power.
    2.5 T&E is not rated at 32 amps. So that overload needs changing, but my shed is on a 16 amp RCBO type A double pole switching, and the...
  • ericmark
    ericmark replied to the thread RTS turn off.
    I did look a few times in the past at off-peak, and until I had batteries installed, as you point out, it often costs more than a...
  • ericmark
    ericmark reacted to Wayners's post in the thread Paint drying time? with Thanks Thanks.
    I'd use the cheap HVLP from Screwfix and spray it because of the slates. Stuff trying to coat them with a roller and brush.. With...
  • ericmark
    ericmark reacted to freddiemercurystwin's post in the thread Paint drying time? with Thanks Thanks.
    My only experience of fast drying paint is that's it's a pain in the arse, it dries so bloomin quick that if you need to over-brush an...
  • ericmark
    ericmark reacted to Wayners's post in the thread Paint drying time? with Thanks Thanks.
    Oil based paints are so different to old formulas. Many of the chemicals VOC have been banned now. You could add harder and driers to...
  • ericmark
    Where I volunteer we have a load of benches for use by the general public, we would pull in the bad ones each winter and repaint, and we...
  • ericmark
    I have only controlled a small power station, four x 250 kW RR eagle powered generators, and the main problem was one generator failing...
    • 1778770733602.png
  • ericmark
    I have smart sockets bulbs etc, for my outside lights, so my wife can turn on the light with her phone before reversing down the drive...
Back
Top