Hi thanks for your reply. My faulty tv is HD ready but it does not have a hdmi input. To get HD you need to use component or whatever. I used to use my xbox360 in the bedroom on the same tv using component and could get 1080 on it.
In my bedroom I have my old LCD tv which suddenly stopped given us any sound. Been into repair shop and they have tried everything but doesn't work.
I have Sky in my sitting room which I have taken into my bedroom via normal aerial cable and magic eye. The sound comes directly from the Audio...
I would only add that I would use a small dish under the valve when you loosen it from the rad. Loosen it very slightly and open the air valve till the water comes out slowly. Don't loosen the valve right off till the water has stopped as there should be quite a pressure still in the rad.
Hi,
I have lost my only key for my Nissan Vanette. I have managed to get in to get my tools etc. out and I have removed the barrel from the ignition to see if I can get a key cut, but as the van has an immobiliser will this work? I know I can go to Nissan but they have quoted me hundreds of...
Hi,
Is there any way to convert AVi files to DVD format i.e to play on my mums standard DVD player, using Nero or do I have to buy another converting program?
Thanks
Hi,
I installed my Epson DX7400 onto my new laptop but I must have selected german or dutch or something.
I have tried uninstalling the driver and the printer then reinstalling it but it always comes up with the wrong language again.
Is there something I can do to change it to English without...
sorry im getting mixed up the DVD writer that im going to be using it for, as the DVD writer requires the USB 2.0 to run/power it up.
Do you think this would be the appropriate adaptor or is it just cheap rubbish :oops:
thanks
I have an ibm r40e laptop which currently only has usb 1.0 or 1.1 (im not sure which) and i am looking to buy some sort of adapter to give me usb 2.0 but im not sure exactly what i need.
Could someone please help me out
Many thanks.
These things can be a knightmare at times.
Some types of syphons i.e the bit you are screwing the button onto can be height adjusted. I remember having a bit of trouble with one of these and it turned out that the syphon was set too low. Try adjusting the height either up or down.
Might...
If you have an indirect cylinder which is heated from a seperate boiler, it could be that the coil in your cylider has rusted and there is now a hole allowing the water which goes through your boiler finding its way into your cylinder.