Recent content by g1arm

Yep, remembered the little inserts. Thanks for your time, mind now at rest.

Just a quick query. Fitting a new radiator and have purchased a Pegler Terrier push fit TRV, with similar push fit lockshield. I assumed given that it's push fit that I can just push the John Guest plastic pipe into it to make the connection. Am I correct or do I have to use copper pipe...

Sorry forgot to insert

I'd welcome a little advice off anyone who may have done this before. Diagram and photo attached to help explain. Basically it's a victorian semi and i want to convert the loft and remove the queen post trusses, i.e. the vertical and diagonal parts. I know steel will be used but i'm just...

Thanks :lol:

Thanks for reply. Do you mean it should be OK to run straight off the 22mm with 15mm up to the loft, similar to existing rads, or extend the 22mm up into the loft and then tee off from there? Cheers.

About to start a loft conversion and doing most work myself. I'm looking to fit two rads in the loft which will be a new 3rd floor. Flow and return pipes on landing are 22mm and 15mm pipes come off into the three bedrooms. Would I be best extending the 22mm pipe into the loft and take...

OK thanks. Is it normal to have so much water? there must be nearly a pint or so in my drip bucket now.

New Worcester Bosch combi suddenly started dripping last night. Pressure fine, heating and water also ok. It appears that water is dripping (sometimes flowing) from the condensate pipe join, i.e where the grey flexi pipe on the boiler attachs to the white overflow type pipe. It looks like...

Thanks lads. I'll sleep on it for the time being - or until the other half changes her mind again!

A quick question that i guess won't produce a quick answer. Can I move my hot water cylinder from my bathroom (second floor) up in to the loft so that i can create more space? thanks

Cheers ! 8)