Recent content by gjf60

  1. G

    Beko WTL82051 washing machine not getting up to temperature on 60c

    I eventually managed to get a service engineer out and he confirmed the 30c on the 60c cotton prog. He ordered a new board and heater element. Fitted the heater element but the board was the wrong part. Put the old board back in so same as before and as expected the new heater didnt make any...
  2. G

    Beko WTL82051 washing machine not getting up to temperature on 60c

    Thanks for your reply. I have since done another wash at 60c and then when the heater has cut out drained enough water out so that I can open the door. I then used my digital thermometer which has a waterproof probe and placed it in the water. It measured 30c. I thought this would be a more...
  3. G

    Beko WTL82051 washing machine not getting up to temperature on 60c

    I have had this Beko WTL82051 machine for about 3 months. The problem is that it doesn't get hot enough on the 60deg programme. From new I have noticed that on the 60deg cotton programme after the heater has cut out by monitoring the wattage on my smart electric meter and placing the palm of...
  4. G

    Worcester Heatslave 11 oil boiler adding inhibitor to system

    Thanks for your reply. I will try that
  5. G

    Worcester Heatslave 11 oil boiler adding inhibitor to system

    I had this oil boiler fitted last year and on returning from a holiday switching on the central heating for the first time over the summer last week I noticed one of the radiators needed bleeding. I bled it but being very tired I didn't tighten the bleed valve sufficiently and some water leaked...
  6. G

    Worcerster Heatslave II oil boiler lockout

    I didn't actually need to reset a thermostat I managed to just reset with the control panel.
  7. G

    Worcerster Heatslave II oil boiler lockout

    OK Ive got it going again thanks for your help
  8. G

    Worcerster Heatslave II oil boiler lockout

    Thanks for your reply Can you give me a clue where to find the overheat stats reset buttons please
  9. G

    Worcerster Heatslave II oil boiler lockout

    This was installed new in August Its been working well but then I got this lockout code FO263 I tried pressing reset button but it didn't help so I turned the power off to the boiler for a few minutes then back on again and now I just have 2 short horizontal lines in the display. The...
  10. G

    How to competely switch off DHW on Worcester Heatslave II oil

    That would be fine for now and maybe later I could wire in a switch
  11. G

    How to competely switch off DHW on Worcester Heatslave II oil

    I don't' have a circuit diagram for the boiler. I could remove a link if you can describe where to look.
  12. G

    How to competely switch off DHW on Worcester Heatslave II oil

    gjf60 New Member I have recently had a Worcester Heatslave II 18/25 combi installed in my kitchen After installation I told the installer I don't use the hot water and how to turn it off to save energy. He said just put it into Eco mode but not to turn down the DHW temperature on the boiler. I...
  13. G

    Beko frost free fridge freezer not freezing

    Its still working ok and I have been monitoring the current used to try and and see if the defrost heater is coming on. Does anyone know how often it should come on. I haven't seen any sign of it only about 0.4 amps when the motor is running
  14. G

    Beko frost free fridge freezer not freezing

    I have a Beko CF5533 frost free fridge freezer about 5.5 years old. The other day I noticed the noise from the fan in the freezer was slightly different but it was not blocked and later the food in my freezer was soft. It was running at about -5c The fridge at 4c about normal. It seemed...
Top