Thanks Gents
It is armoured cable from the board in the house out to that box on the external wall so I was assuming that all remains and what I ask a Sparky to do is either remove that box from the external wall and replace with something that then splits the power out to the three areas (all...
32a mcb on the main board in the house, feeds this directly.
I was inviting ideas and thoughts ideally. If someone said, I'd leave that and then run a cable from that to a control box then go from there, or, yes that could be replaced with a controller but you'd need to downgrade the MCB in...
I've got a 32a switched controller like the one below which used to run a hot tub.
I want to run some power out round my garden. I have two sheds with no power
And currently no garden socket and no garden lighting
Can I change the box or use it to run a 4-6 way controller? Then run Cables...
HI guys
we've got a push button flush which just gets stuck slightly open sometimes and the toilet keeps filling. I have tried all sorts to stop it but now think I just need to replace the siphon assy.
However, when looking at the loo and cistern I have no idea how I will ever get to the...
Top bottom and side photos coming soon.
We have a scrap metal place literally next door. But it does seem daft to not break it up first for parts.
To be honest we have little idea of what bits are what but i'll get those other photos up then all offers for parts are welcome, as long as they...