Thanks BathJobby but its 150m worth of 2 inch pipework needing to cut down to size. A hacksaw will take ages and wont be as neat as a pipeslice type tool.
How can I easily and quickly cut 2 inch copper pipework. What specific tool do i need? I've got 15 and 22mm pipe cutters and i doubt theres something similar for this so im hoping theres another type of unit that I haven't thought of yet. Any help would be great.
Thanks in advance
Hi,
Ive just installed a pump on a hot water cylinder. Its constantly running and ive worked out that this is because the vent is installed right at the end of the pipe run. The pump thinks that theres an open tap and keeps running. The tank is over 50m away and I would have to run the new...
Hi,
I went to a clients house where they had 2 problems with their boiler.
1. the heating comes on with hot water demand. I am going to advise the diverter daiphram washer is replaced.
2. When the heating is on by itself the ignition sequence comes on then the flame lights up. The...
the problem is thhey cant control the times for the boiler. Its either constant on or off. The boiler is one of these old ones with 4 pipes coming out the back for heating and hot water.
I want the same one as it makes life simple to just wire in the same thing as there are about a million...
Hi,
i've gone over to this job with the above timeswitch. I need to get an exact replacement though if that not possible then perhaps another make??
Please get back to me asap as these customers are starting to get on my nerves
Thanks in advance
Hi, First time using this so please forgive any mistakes :-)
I went to a job at the beginning of the month as the tenants boiler (as above) kept on shutting down. I found that whenever the hot and cold water are mixing the hot shuts off. If the hots on alone then it can run for ages.
Why is...