I damaged the one i removed. Buggers to get out. Are you thinking the fault is with one of the sensors or the wiring between. To take them all out would create a right mess. They have been so well fit you cant tell there is a sensor in there!
I took one out from door i thought was to blame. They are an 8mm diameter tube with 4 wires. There is no plate screwed in. The tube is just set flush in the door casing. I guess about 20mm long
Guess so but how do i find it? All the wiring is buried behind architraves and plaster! By short I presume you mean the blue is touching the orange between the first and second door at some point (the door which is working is right next to the box so i assume its the first on the run) thereby...
Hi
Thanks for coming back to me. They are all on the same zone (zone 2) I have zone 1 for front door and zone 3 for all the upstairs doors.
The downstairs zone is all on a single wire run running in series. No return back to box. They have used telphone cable switching on the blues (both...
Essentially my downstairs zone has worked with 8 hard wired doors for years but now only one door on the circuit is working. The other 7 are just dead as if they have no sensors connetced. I can set the alarm and leave the property no problem with just a single door on the circuit armed. I am...
I have a strange problem I am struggling to resolve. My downstairs zone (timed & final door set) has stopped working on all but one door. In total 8 doors on the downstairs circuit are wired with door sensors but the system will only set on one of them the other 7 being comeptely ignored. It...
Hi
Can somebody help me please? I have a Royal Cozyfire which keeps cutting out. It may do this after a few minutes or sometimes after one hour. I have changed the thermocouple (was this problem a couple of years ago) but this has made no difference. Is there anything else I should try...
I wonder if you can help. I bought a Zanussi cooker yesterday (ZDQ695XR)which was an ex display model. All wiring is disconnected inside rear panel and I need to know which wire goes where.
I have a photograph of this which I can email if anyone can help me.
Regards