Recent content by jimnastick

Hi oh right! thought you meant jubilee but had to ask,as for the old clips these seem to be crimped of some sort so think im gonna struggle getting these off without damaging anything but ill just have to have a go Many thanks for your help and advice

Hi You say pipe clips but do you mean jubilee clips? and what would i use to remove the old clip as i scared of damaging the rubber

Hi Sorry for being thick but do you mean draining the whole system? Many Thanks

Hi Thanks for the quick reply,do you think somewhere like city plumbing may do it as i have one close by? and also apart from the boiler being turned off is there anything else i should consider whilst changing/fixing part? Many Thanks

Hi When i turn the Ch on the system the system fires up as normal but then soon after it starts to drips liquid onto the worktop below where the boiler is housed,it looses pressure not massively but enough to create a small puddle,however when i switch over to DHW the leak seems to stop? I...

tony it looks like you have hit the nail on the head i measured both flows with a bucket and a stopwatch and they were both the same but it looked totatally different on the eye, i knew i was filling a large bath compared to a kitchen sink but even so it looked different anyway sorry for...

hi i have recently had installed a new bath (monobloc tap)and when i open the hot tap the dhw comes out slow but when i open it in my sink downstairs it comes out a lot faster,the temperature is the same when tried on both sink and bath individually the feed to the bath is 15mm which i have...

thanks for your help just wanted to clear this up as not long before full steam ahead once again thanks

hi iam in the process of doing my bathroom and was wondering if i would need to p.v.a. this wall.the wall in question had tiles on it originally (dot and dab oh dear) now these came off the wall very easily.the wall is a plasterboard wall with a thin skim on it i have uploaded an image please...

didnt think it would take that long but will leave just to be sure thanks

hi i have just used a thin bead of dow corning 785 clear in my shower enclosure and was wondering how long before it sets/cures i have been on the website and looked on the tube but cannot find the answer please advise many thanks