Recent content by Johnday

  1. J

    LED's

    Hi Guys & girls, I need some advice. I need to put some flexible strip LEDs in a cupboard. I need them to light up when the cupboard door is opened. The LEDs are powered by a 12 volt 5Amp AC/DC Adapter. Input 100-240 Volts 50/60 Hz 1.6 Amps Output 12 Volts 5 Amps Is it a bad idea...
  2. J

    Running a spur off a cooker circuit?

    I’m just wasting my time here, :cry: thank you all and good night!
  3. J

    Running a spur off a cooker circuit?

    I fear I have confused you. The cooker and the hob are in 2 completely different parts of the kitchen and need to be run from their own independent outlets. That is why I want to split the feed from a junction box to them.
  4. J

    Running a spur off a cooker circuit?

    How do I split without a junction box?
  5. J

    New Cooker Circuit

    I am installing a double oven (20 amps) and a separate hob (32 amps) I want to run a 6mm twin and earth from my consumer unit with a 45amp MCB to a junction box, then run a cable (in 6mm) from the junction box one way to a cooker outlet for the oven and another cable (in 6mm) to another cooker...
  6. J

    Running a spur off a cooker circuit?

    High praise indeed.
  7. J

    Running a spur off a cooker circuit?

    Dear Moderator 9 sorry for "Hijacking" the thread. But as the thread was so old and my question seemed relevant to it and as this is my first go, please accept my apology . John
  8. J

    Running a spur off a cooker circuit?

    Thank you should I start a new thred?
  9. J

    Running a spur off a cooker circuit?

    The junction box is so I can split the supply and run it to 2 independent outlets. The oven is on one wall and the hob is going to be on another. If I could easily get onto the existing 32 amp ring main I would.
  10. J

    Running a spur off a cooker circuit?

    I am installing a double oven (20 amps) and a separate hob (32 amps) I want to run a 6mm twin and earth from my consumer unit with a 45amp MCB to a junction box, then run a cable (in 6mm) from the junction box one way to a cooker outlet for the oven and another cable (in 6mm) to another cooker...
Back
Top