Recent content by kevinjc

Yes that is the case. I done G-S not long ago and have been on the register but am due to have my visit/interview very soon. they call it the probation period and mine was for about 2 months i think. Good luck Kev

I go with previous frost damage and Plumber not to blame UNLESS you stated that when he does the work you Want ALL copper replaced with new. For the many Bathrooms i have done i have never had a client ask for this, Its very rare for me at least that a client will request something that will...

Thanks Steve. Will let you know how i get on :) Kev

Hello Steve Thanks for reply, it does have links from one to the other, in that case does it matter what terminal i connect to? the MI's just state 3 live 2 nutral and earth without saying you must connect to a preferd one of the 3. yet if i trace the 3 lives under the case i can see that 2...

Hello I am about to replace oven and hob, should be like for like but noticed my hob has 3 ports for live 2 for nutral and an earth. Would like to ask can you use any live to live? and nutral to nutral? and why do they have 3 and 2 options? Thanks

Ok, im going with the cavitation, all points that way with pump also making more noise. Think i will replace pump and have a little peek at the impeller. :idea:

Hello I have a wickes shower pump that intermitently dumps out burst of to hot water. it is attached to a thermo mixing valve also, not sure if i should just service the valve, replace the pump, or as i have been advised turn the temp down a bit on the hwc as some times pumps can become...

Fixed, it was the taps breached at manufacturer.

in short would be when i turn my cold on for new basin mixer tap the boiler fires up so must be letting the hot supply come out of the cold side aswell as hot. could it be just the taps at fault

Hello, i just fitted bathroom and fitted a swirl shower valve, i have a combi so i by passed the cwsc for mains pressure in bathroom, all was going well till i tried the basin mixer and found hot water pressure over powerd by the cold. have fitted a prv on the feed but still no good, also even...