Recent content by lolekbass

  1. L

    Boiler size - please advise

    At the moment we have a Petterton Suprima 60 (I think is 17kw) + Thermal storage Boilermate 150L Boiler will be moved to garage + new 22mm gas pipe from meter box We want to put new system because boiler is 22years old and causing problems (not fire up always) and Thermal storage is just...
  2. L

    Boiler size - please advise

    Hi Guys. We decide to replace our 20 years old boiler and new thermal storage (long story) with new boiler and Hot water cylinder. I asked 3 local plumber/heating engineer for quote. After survey we receive quotes for 3 different size of boiler - very confiusing All 3 engeeners sugest system...
  3. L

    Pyronix Enforcer - Wireless JammWZm issue

    During day I had another jamming issue and after that when I check app I found message about tamper was activate / lid open (one of old PIR sensor) but lid is closed
  4. L

    Pyronix Enforcer - Wireless JammWZm issue

    Hi Guys I have only 3 old PIRs then I will replace them and we will see if this help LED street lights are 12m away from house - is this is enough to cause problem? I don't really want to switch off jamming protection Changing setting from 030 t0 100 will make difference ? Thanks
  5. L

    Pyronix Enforcer - Wireless JammWZm issue

    Hi. I open all sensors today and check if there is any description or info about dual frequency. I didn't found any sticker with DF, I found only sticker with PCB version Old PIR - 2.21 New PIR 3.51 Door contacts 3.5 (Old and New) Old alarm was installed in 2017 not 2014 (I just found some...
  6. L

    Pyronix Enforcer - Wireless JammWZm issue

    2.19AM and 5.19AM and 8.56AM
  7. L

    Pyronix Enforcer - Wireless JammWZm issue

    Do you konw how I can check this? On the back New sensor is KX10DP-WE-kit On the back old sensor is KX10DP-WE The old ones were installed in 2014
  8. L

    Pyronix Enforcer - Wireless JammWZm issue

    I'm using 4xAA rechargeable batteries I think they 1.2V instead 1.5V maybe this is the reason I will check them with multimeter tomorrow
  9. L

    Pyronix Enforcer - Wireless JammWZm issue

    Hi there. I have recently experienced some issues with my Pyronix Enforcer panel. Last night the alarm went off twice and when I checked the logs I found "Wireless JammWZm" after pressing C for more info I found "Control Panel Zem32WE" There was a thread on this forum about this same issue in...
  10. L

    Gledhil Boilermate - how to use/setup

    I think when boiler breakdown (is over 20 years old) I will replace thermal storage with traditional hot water cylinder. It's a pity that 4 months ago when the thermal storage broke, it was not replaced with a hot water cylinder, the just put new thermal storage (this was done through insurance)...
  11. L

    Gledhil Boilermate - how to use/setup

    Hi Guys. I need advice how to use/setup efficiently and economically thermal storage. Recently we move into new house and instead traditional hot water tank we have thermal storage. We been told this is working opposite way to the traditional system with hot water tank. We have very old boiler...
  12. L

    Reusing Pyronix Key fob

    Hi Guys. One more question. How to disable backlight on Deltabell plus? Do I need to link "12V-" terminal with "backlight disable" terminal?
  13. L

    Reusing Pyronix Key fob

    Hi Guys. I nearly finished installation but I have two more question. - What mean "c" on screen next to time (I can't find anything in manual) - Is there any chance to program panale to automatic disarm alarm every morning?
  14. L

    Reusing Pyronix Key fob

    Thank you
Top