Recent content by luckyman4274

but if i do that it will effect the 600mm female joint or i would have 50mm overhang of worktop on first unit running of to 30mm so when you look along the units you would see kitchen running of ma head is bursting trying to find a solution,i have a feeling the only way might be to rip the wall...

Hi i am currently fitting a kitchen it is an L shape the sink run is ok but the long hob run i have a problem,the wall starts of flat on the horizontal then after the second unit starts to run back the way 20mm therefore when all units are laid out and screwed together in a straight line you...

also the ceiling in hallway below is showing no signs of water or dampness

hi i dont know how to get a picture in but could it be heavy condensation as since moving the bed away from the wall it has dried up,with 4 inches of thawing snow on the roof i thought it would get worst if it was coming through the lead valley/brickwork also the wall paper wasnt coming away...

hi all i live in a semi detatched with dormers front and back which are tiled with plain vertical tiles,my problem is i have water coming through the wall,i noticed this when i moved my sons bed it was very wet the only thing i thought it could be was there is the dormer then 1 course of tiles...

where i live i'm surrounded by tree's which created a problem with moss and the roof looked a mess and guttering kept clogging up,then i seeen an advert for a roof coating called aquaseal,got them out they coated the roof,now my roof looks brand new my gutters are clear and the moss dont grow on...

hi all i have very low hot water pressure in kitchen and utility room could it be an air lock there is a cloak room next to kit/utility and the pressure in there is great also upstairs is good any info appreciated

hi all i am about to lay a hardwood oak floor,i have sheeted the exsisting floorboards with plywood nailed every 150mm and am going to start laying the oak,my question is can i use my paslode angled finish nailer to nail the boards any info appreciated

hi all i am about to lay a hardwood oak floor,i have sheeted the exsisting floorboards with plywood nailed every 150mm and am going to start laying the oak,my question is can i use my paslode angled finish nailer to nail the boards any info appreciated

hi all how do i remove black paint from the lead flashing around my house anyone know

when laying a solid wood floor should you go across exsisting boards or with exsisting boards/should you go across the window or with the window so that when sunlight comes in window you dont see joins between boards ??????????

i was thinking about aquaseal roof coating i have seen it on a couple of roofs and it makes them look like brand new roofs doesanyone know roughly how much this stuff costs they reckon its a fraction of what it would cost to retile the roof __________________________________ Lynda, moderator...

i have an alpha cb28 installed and its the the business totally faultless would defo recommend

would it be possible just to renew the consumer unit to one with a breaker system rather than fuses as ive just decorated the whole place and renewing all the cables would totally destroy me lol,the cables all look pretty decent and the kitchen has been fully rewired

hi folks ive not long moved into my house it has an old fuse type cu with only one blue fuse for sockets which is supplying the whole house is this normal ? i live in a 3 bed semi and theres 3 cables coming from the blue fuse any info appreciated