Madrab's latest activity

  • Madrab
    Madrab reacted to Stringman_uk's post in the thread shallow bath waste washer with Like Like.
    And, obviously, When tidying up all the stuff elsewhere in the house I found the original washer!!!!!!!!!!
  • Madrab
    Madrab replied to the thread shallow bath waste washer.
    sods law of course!!
  • Madrab
    Madrab replied to the thread 550mm basin wall hung.
    Yeah but there are 3 types of breeze block, low, med and high density - or concrete bricks - all are used in the building trade...
  • Madrab
    Madrab reacted to Alec_t's post in the thread Bath tap issue with Like Like.
    As a temporary bodge you could put a rubber band round the tap to provide a barrier for the water.
  • Madrab
    Madrab replied to the thread Bath tap issue.
    Cheaper deck mixers are always a challenge, the rubber seal never seems to be thick enough, nor does it seem to cover the entire...
  • Madrab
    Think we already covered this? https://www.diynot.com/diy/threads/40mm-boss-adapters.655018/
  • Madrab
    we know thanks - @denso13 had already pointed that out. It was in response to slowdown response, hence the forum rule not to resurrect...
  • Madrab
    If the tile backer board is cementitious and at least 12mm thick, minus insulation, then that should be strong enough, to minimise...
  • Madrab
    Madrab replied to the thread 550mm basin wall hung.
    As long as it's at least medium density, light density would struggle to hold that if any weight was applied IMO.
  • Madrab
    Madrab reacted to denso13's post in the thread Cleaning / servicing a 3 way valve. with Like Like.
    8 year old thread.
  • Madrab
    Madrab replied to the thread shallow bath waste washer.
    As long as the washer is large enough so the edge of the bath waste sits on it so when it's tightened it forms the seal then that'll be...
  • Madrab
    Typically 3 way valves do wear out but more so the motors/switches but the valves themselves tend to last for quite a long time, if it's...
  • Madrab
    Madrab replied to the thread shallow bath waste washer.
    It will be a flat washer with that flat face on the inside of the trap, the washer linked to above is more for say a McAlpine 11/2" bsp...
  • Madrab
    Madrab replied to the thread 550mm basin wall hung.
    This is the fixing instructions that come along with that basin, it's also marked that it comes with the required fixings which will...
  • Madrab
    Madrab replied to the thread Toilet handle not level.
    If the syphon is acting up/return sticking etc then TBH it's time to replace it, it's worked hard all it's life and doesn't owe anyone...
Back
Top