Recent content by mattguk

House is circa 20 yrs, and has the corrugated sort of shape. Thanks for the ball park it gives me a good idea of roughly what I should expect. Trade associations: I thought as much just a paid club for the logo. Shame really. Its funny where my parents live in Surrey, companies are...

Sorry to ask yet what is probably yet another roofline quote question but... So we've just moved into a new house and need to get the fascias etc replaced as they have rotted away... Anyway the problem I have is how to tell if the quotes I have got are reasonable. Unfortunately it seems no...

Thank you so much, if I find I need to go down that route, that would be very very helpful. thanks again for all your help

Thank you so much for your help, but i think due to the costs of parts, and possible labour, I may have a quick clean, check all the connections for corrosion etc... then probably buy a new one, as I can't see pumping anything over £100-150 into a 5yr+ machine being sensible. Thank you again...

Thanks, I guess my GoogleFu was good today!! The no. in the door is 914601638 | 00 I'll pull the machine out later and have a look at the pcb and motor, I'll grab multimeter and compressed air out and have a look. Seeing that a replacement motor is very expensive, and the machine is...

First of all, thank you for taking the time to reply it is appriciated. Oh right!! Ok any idea on testing it? I found this link on another website http://www.electrolux-ti.com/others/599/703/247EN.PDF Does this look ok? as it says to replace the motor if leakage is found, from you post...

I've updated the original post as after finding the diag process I have found I'm getting the following error. E51: Motor power triac short-circuited Now I need to find a service manual or a guide on how to diag the motor, guessing its probably the wiring or motor faulty as I'm guessing...

Updated: E51: Motor power triac short-circuited Well until today its been a great machine. It tripped the rcd two min into the 40 degree cycle, turned it back on and the display was showing 1.23 of program left with start/pause button flashing and no response if you pushed it. I've...