Recent content by navgeeza

hello all, merry christmas and a happy new year. I've been pondering about polishing or waxing my laminate floor all waxes and polishes usually say suitable except laminate. Anyone know of a product or way i can get a shine to the floor?

Exactly what i thought :shock: lol Thanks everyone, will get a new unit ;)

Yes its in properly, tried changing with another bulb and same problem

I have some kitchen under cabinet flourescant lighting, the linkable type, there are 5 lights linked to a fused spur that is also connected to a 2 way lightswitch (one that controls the ceiling lights and the other to these lights). Problem lies with one particular light, sometimes it will...

Hi all, Wanted to know if using exterior grade plywood was acceptable to use for a shower to be tiled over of course.. or should u use aquapanel? thanks

Its probably not exactly like a plastered wall but has a nice smooth finish and ideal for painting over.. I put about 2 coats of undercoat just out of preference and it looks great.. One thing to also consider if you go along this route is which way to paste the paper on the wall.. i did it...

Do what Dazb suggested i did this although with 1000 guage paper.. and it works real well.. but i made some slight mistakes of overlapping in a couple of places and that shows! as a rule of thumb a small gap is better than an overlap (the filler works great!).

thanks!

Is this: fitting (15mm to 22mm reducer) compatible with copper pipes?

thanks for the reply ;)

Masona, any pictures? and info about the slabs would be useful to me please.

depends mainly on the size of the holes, but you are probably better off getting the one coat plaster as its much more easier to work with.

hi all, i need some advice about a shower i'm going to be installing, its a 10.5kw triton opal shower. I have a Mem Memera 2000 consumer unit (i dont think the model i have has RCD protection) and i've been looking for a suitable mcb, but it seems like they are only available in a 40A or 50A...

True probably never going to drill that big holes that often, although i imagined that the blackspur bits would probably only last about a couple of uses. I think what i was thinking was would it be cost effective to buy a cheap drill like the one in screwfix (2nd reply) and bits as to hire...

I need to drill a few holes through a brick wall, 1x50mm and two 110mm, was thinking of hiring an sds drill and diamond core bits to go with it.. or could i get away with buying the blackspur drill bits and using a standard hammer drill? Your thoughts/recommendations?