Hi,
I found the root cause of the issue, but only after complaining to the kitchen company who were given the 'off the record' answer by the rep.
The problem is that AEG didn't make this oven and like most companies these days, they buy their products from other manufacturers and then put...
Hi all,
We had a new oven fitted and its had what we regard as a fault from day 1, but AEG dispute this; working as designed is their response. The issue is as follows and I would welcome your inputs.
Issue: The heat circulating fan stops running when the oven has reached temperature and...
Hello,
You could try this solution. Tried it myself and managed to resolve the lockout problem by replacing a couple of components on the PCB.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260219528036
They provide you a detailed electronic guide on how to fix the problem yourself.
This has slipped down a bit now, so I thought I'd push it up again.
Anyone else have any other views on the height difference between the boiler and tank for the water to flow correctly through the tank coil and back to the boiler.
Thanks in advance
Paul
The red light flashing, means that its in lock out (Fault) mode and therefore pressing the reset button clears the fault. Mine has the same problem and requires me to press the button once a week. Its worse for some people on this forum, who need to press it daily.
Its a common fault with...
Thanks for the quick response.
At the moment it there isn't a pump on the system, only on the heating side, so I suppose it would be a gravity fed system. Are you saying I would need to change it to a fully pumped system?
Hi there,
I've had a look through previous topics and don't think this questions been asked before.
I live in a bungalow and want to change the boiler from a floor standing to a wall mounted. This will mean that the boiler will be the same height as the hot water tank.
Will this cause any...