Morning all after a bit of help please. we had problem with the mid port valve a few weeks ago as the heating would not come on only the hot water.
Engineer came out and replaced the top bit as it had burnt out. how ever the water in the tank is now scolding hot and the thermostat on the tank...
yes its a long straight run under the bath , Problem is the bath is sealed with a tiled bath panel , Was hoping to be able to do something from outside .
Matt
So wife told me waste pipe outside was leaking when emptying bath so i had a look its loose and not pushed on properly.
Seems there it not enough space to push on the compression fitting.
any help what to do here would be much appreciated
Thanks Matt
Afternoon All can anyone help please ?
i have Coll error on my sisters Smeg Oven and not sure what it means ?
https://photos.google.com/share/AF1QipO_B67QMc2Ex4P89Jluu7LYePTohNF6UUzQURvkko8cV-JcN-Iv6x_ozYYGnWifeg?key=UGZ5Rm1hQXlUS2dMX1V2MUl3Vk5rSmd6SFY1S1pR
Ok i have taken some pics just to make sure but it looks like your Right Black wire is hw off
i just need to change over grey wire to black/earth terminal on block ?
The cylinder is right next to me in this pic . So do i need a plumber or a electrician ? to come sort this out ? anyone to recommend Leeds/Wakefield Area ?
Yes it was but the CH was has not been used since march
Just to confirm the wireless stat has not been fitted . system is as was
Only thing that changed is the grey wire if we didn't put it back right .
Morning All After bit of advice
We were due a wireless thermostat fitting by a (unnamed company )
due to how my system is they could not wire it in needed a live feed
After they went things were not right after they had poked around . boiler would not fire
My dads a sparky although works on...
Many thanks for the reply .
Would cement backer board be any better then ply on the floor ?
http://www.jameshardie.co.uk/developer/products-backerboard-hardiebacker500.shtml
Cannot get in to lift all the chipboard floor up .
Ok so we bought 15 year old house that had a new bathroom suite in .Great or so we thought !!
The floor looked great when we moved in after 2 Weeks the tiles have come loose and the grout is cracked .After pulling a few up its been tiled straight on to a dusty chipboard floor !!
My plan...
So moved in to a new house 2 weeks ago now .
Bath is flexing at opposite end to taps and is coming away from the wall.
So i have taken the panel off to have a look. The legs were on tiny square blocks.
I was going to run 3x2 from the back legs to the front . I have put a pice of...