Recent content by rickmacc

Thanks I think the element is working when I open door it’s hot inside just not getting water inside I’m going to remove motor tonight and look and the propeller bit

I have a kenwood KDW60B16 dishwasher and the wash arms aren’t spinning and no water coming in It drains the water away at beginning of cycle then when it goes to next stage it doesn’t spin arms, the main motor is making a buzzing noise. I removed motor and turned it, with flat screwdriver at...

I’ve got someone coming around on Wednesday but just wanted a heads up what it could be I’ve seen posts about faulty gas valve or fan so don’t mind paying if it’s just that because he’s talking of replacing boiler but it’s been fine for 15 years only ever had to solder dry joint on PCB before...

I have a Potterton neataheat 60e the pilot light comes on but main burner not firing up I can hear and see pilot ignitor clicking when pilot is already on but main burner not coming on any ideas please

Yes stripped it all down and give it a good clean still no joy

My aqualtis washing machine is leaking from the soap drawer and running out of bottom of door it's getting that bad I have to put towels down now, I have removed soap drawer and cleaned still no joy any ideas thanks

How do you wire up from receiver to boiler do you need a perm feed from receiver to boiler then how do u make it switch from receiver

We have a couple of brick pieces that have fallen off,on a outside wall, i want to protect it with some sort of paint or sealant any ideas?. I have heard you can use pvc glue and water is this true. Please help

forgot to say it is a double element, and reistance on both are ok, and both are not working.

Smeg oven top grill not working tested element reading ok, getting 240volts to element when switched on but no heat. On further inspection i noticed the small oven variable grill knob just spinning around and around, it should notch from 1 to 6 and stop. I took top panel of on cooker and found...

We have a Hotpoint Aquatis AQGD 169 S washing machine, and the plastic drum paddles inside the drum keep breaking off, we have had the machine about 18 months and no problems but i have changed 2 paddles in about 6 weeks. Is there a special way to fit them because there is a bit of metal in the...

Fitted new programer Potterton EP 2002 and all is fine, it was a straight swap, £32 of E-Bay. :lol:

We have a potterton ep2001 programmer and if you switch both CH and HW to off on panel it goes off like it should, then all of a sudden the LED's on CH and HW come on and boiler fires up, how can this be? Also when the controller should go off when set time both LED's stay on and boiler still...

It is called add on and you can get from any upvc suppliers ie Gap

We have a electrolux premier double oven, and when the main oven has been on for a while the fan stops working and the interior light goes out but the oven stays, on if you switch off for about 5 mins and switch back on again it is ok. Any ideas very frustrated wife nagging me!!!!