Recent content by rsats72

Hello, My Diplomat ADP8101/2 dishwasher has developed a fault. When I start the machine the "In Progress" light comes on but the machine does not begin its cycle, and there is no way of resetting the machine. I'm thinking that perhaps the motor is not working? Any advice/help would be much...

Do I use a different type of FCU for the lights? Thanks.

Regarding your reply: Q: But you do need to be sure what circuit it is being spurred from and the fuse rating of that circuit. A: The spur comes off the ring main and is protected by an RCD. Q: I would, put in a 13A fused spur where the current socket-outlet is, then extend from there...

I've been advised to get a 13A fused spur connection box. However, I'm still faced with a bit of a dilemma – how do I connect all the other supplies. Most of the boxes I have seen are 2 gang which means there's one gang for the spur supply plus another gang for the extra socket but how do I...

It's not a fused spur. The spur is taken from a single socket in my house which is wired directly to a double socket outlet in the garage. The lighting is also wired into this socket. All the info is included in my original post. Apologies that it isn't in electrician-speak.

Hello DIYers, I have an electrical supply in my detached garage which runs off a spur supplied by the ring main. There's a double socket in the garage which I want to move to a different location. However, the supply also runs the inside lighting and outside lighting so there's three sets of...

The garage is detached. The spur comes off the main supply in my house and goes to a double socket in the garage. What is a fused spur and where can I buy one from? Could I not just add another socket onto the current one and plug in an RCD adapter for the appliance? I plan to run a tumble...

Hello, I've got a double socket in my garage running off a spur from the ring main. This socket supplies the lights in the garage (wired into the socket) and the outside lights (powered by a plug in the socket). I want to move the socket to the back wall of the garage (approx. 4 metres away)...